1/4" and 3/8" Drive x 14-3/8" Double Head Flex Ratchet Wrench

Comments about Pittsburgh Professional 1/4" and 3/8" Drive x 14-3/8" Double Head Flex Ratchet Wrench:

I bought this for a honda timing belt/water pump job, initially skeptical. However I used it for most major bolts except very high torque pulleys. Low profile and versatility came in handy in very tight awkward spaces. I expected to be disappointed but won't give it up now. The length is great for additional torque, and the hinge held up under duress much better than I anticipated. It will start to bend under too much torque, but bent right back without damage.

Comments about Pittsburgh Professional 1/4" and 3/8" Drive x 14-3/8" Double Head Flex Ratchet Wrench:

I needed to remove some nuts and bolts from an engine mount on a transverse mount engine. The nuts and bolts are impossible to reach with a standard ratchet, and the workshop manual calls to drop the entire suspension to access the nuts and bolts. With this low profile, swivel head, ratchet, I was able to access the nuts and bolts without dropping the susupension. Saved countless hours of labor. The nuts and bolts on the 12 year old mount where seized on, and I thought the thin gauge of this ratchet and head would just snap when I tried to remove the frozen nuts and bolts. I put on some safety glasses and forced it will all my might. The nuts and bolts all came off. No problem for this ratchet. I really abused the ratchet, and was really impressed with how the polished finish held up. It looks bright, new, and shinny, even after some major use and abuse of the tool. Still looks like new condition. Very happy with the purchase. Harbor Frieght - I love this in the 1/4 and 3/8. Please consider making this same wrench in a 1/2 version. Maybe do a 3/8 on one end and a 1/2 on the other end.

Comments about Pittsburgh Professional 1/4" and 3/8" Drive x 14-3/8" Double Head Flex Ratchet Wrench:

Used on tightening torque convertors, alternators, tight spots.

Comments about Pittsburgh Professional 1/4" and 3/8" Drive x 14-3/8" Double Head Flex Ratchet Wrench:

This is a very unique and useful tool. It has the lowest profile I have ever seen, which makes it great for use in the tight engine compartments of modern vehicles. I always have a use for it in my shop.

It is an excellent quality tool, and I would recommend it to anyone.

Comments about Pittsburgh Professional 1/4" and 3/8" Drive x 14-3/8" Double Head Flex Ratchet Wrench:

Great too for [$]

Comments about Pittsburgh Professional 1/4" and 3/8" Drive x 14-3/8" Double Head Flex Ratchet Wrench:

I have owned for 1 year. Very thin, and seams to be pretty durable. Use in tight spots like drive belts. I am looking for a 1/2" now. The switch needs to be relocated, it gets caught sometimes causing it to rachet the other way.

Comments about Pittsburgh Professional 1/4" and 3/8" Drive x 14-3/8" Double Head Flex Ratchet Wrench:

i wish they made it strong sprint loader. i was used one time and it fall off the screw and the sprint. i thought it fall off from my car. i said to my friend that i didn't know toyota make sprint like these. then i look at the tool shot it broke. i re-tight it back on it work fine. best thing is that life time warranty. im not sure how long it will be available for replace it because made in chaina. it could end up discontinue item.

Comments about Pittsburgh Professional 1/4" and 3/8" Drive x 14-3/8" Double Head Flex Ratchet Wrench:

I purchased this wrench after a coworker found it in our local store. I did not even have it in my tool box at work for an hour before I was using it . So far I have found may good uses and look forward to seeing how it holds up to daily use in a repair shop . I like this wrench so much that I going to purchase another soon.

Comments about Pittsburgh Professional 1/4" and 3/8" Drive x 14-3/8" Double Head Flex Ratchet Wrench:

It's good, but the one I bought does not function smoothly.

The switch to flip the rotation of the ratchet is stiff and hard to change a lot of times especially on the 1/4" side. You can't flip rotation while leveraged on a tooth so you got to release before you can switch.

The attachment head sometimes doesn't hold my sockets in tighly and falls off.

I do have to admit though that the handiness of this tool is nice. It's thin and pretty light plus has a flex head so it'll fit in all those hard to reach areas.

Comments about Pittsburgh Professional 1/4" and 3/8" Drive x 14-3/8" Double Head Flex Ratchet Wrench:

As a professional mechanic, I am always on the look out for tools that increase my speed on a job, while still doing it correctly. What a great product!!!!! I like it so much I have to get the 7" straight one. I guess it would be nice if the flex head locked(on both models). My tool guy has nothning like this. No question that this tool has incrteased my efficiency in the shop.