Harbor Freight Tools
Price Sticker
$3999
Was $44.99
Save 11%
SKU: 69855

HAUL-MASTER 4000 lb. Cable Winch Puller

Price Sticker
$3999
Was $44.99
Save 11%
Compare to
TEKTON 5547 at
$52
Save 23%
This heavy duty come-along has a two-wheel ratcheting gearbox for heavy pulls. Use this puller for for everything from light vehicle recovery to heavy material handling and auto bodywork. Read More

Product Details

Heavy duty ratcheting cable winch puller is designed for single or double line operation. Use for everything from light vehicle recovery to heavy material handling and auto bodywork.

  • Two-wheel ratcheting gearbox
  • 1/4 in. x 10 ft. aircraft grade cable
  • Heat treated steel frame
  • Hook assembly is easily removed to attach accessories
  • Heavy duty steel safety hooks
  • Single or double line
  • Snatch block for more pulling power

Important Information

  • For dead loads only; not for lifting.
SKU(s)
69855, 543, 63327
Brand
HAUL-MASTER
Line pull capacity (lb.)
4000 lb.
Cable Gauge
1/4 in.
Cable Length
10 ft.
Cable Material
Aircraft Grade Steel
Material
Steel
Product Height
4 in.
Product Length
29-1/2 in.
Product Weight
14.52 lb.
Product Width
4 in.
Shipping Weight
14.85 lb.
Note: Specifications are approximate and subject to change

Be The First

This product has not yet been reviewed

Product Support

These Frequently Asked Questions are a supplement to the Owner's Manual and Safety Instructions. Please review the Owner's Manual for safety warnings and precautions, and assembly, operating, inspection, maintenance, and cleaning procedures.
For vehicles, select a winch with a rated load of at least 1.5 times greater than the gross vehicle weight rating (“GVWR”) (usually located on the driver’s door sill). This ensures the winch has enough power to pull your vehicle, even when faced with added resistance caused by an obstacle, steeper incline, or loose terrain.

  • General Winch Rated Load Recommendations:
    • Trucks/SUV’s: 9,500 to 12,000 lbs.
    • Side by Sides: 4,500 to 5,500 lbs.
    • ATV’s: 2,500 to 3,500 lbs.

For winches mounted on trailers, select a winch with a rated load of at least 2 times greater than the vehicle weight. More power is necessary because the winch typically pulls on the outer layers of the drum when loading a vehicle onto the trailer. Pulling on the outer layers decreases the maximum line pull of the winch.

A vehicle battery with a minimum rating of 650 CCA (Cold Cranking Amps) is recommended to power a winch on a SUV or a truck. A battery with higher CCA should be used if you expect longer pulls or more frequent winch use for any application.
Winches are rated by the maximum load that they can pull on the first layer of rope on the drum. For electric winches, as the rope layer increases, the maximum line pull of the winch decreases. Please consult the specifications table in the Rated Line Pull and Layer chart provided with the winch. Maintain a minimum of 5 wraps of rope on the drum when winching on the first layer.
You must regularly inspect your winch to ensure safety and optimal performance. Before inspection, disconnect the positive battery cable from the positive battery terminal on the vehicle.

Inspections should be performed when the winch is clean and free from dirt and debris.
  • Before each use, inspect the general condition of the winch. Check for loose hardware, misalignment, or binding of moving parts, cracked or broken parts, damaged electrical wiring, corroded or loose terminals, and any other condition that may affect its safe operation.
  • Examine the wire rope. Do not use the Winch if the Wire Rope is frayed, kinked, or damaged. Refer to the manual for further guidance on rope inspection.
  • To increase the flexibility of a steel rope, lightly oil the rope, wipe off any excess oil, and wind it back on the drum.
We guarantee this product to be free from defects in materials and workmanship 90 days from the date of purchase. Limitations apply.