3 Piece Titanium Nitride Coated High Speed Steel Step Drills

Comments about Warrior 3 Piece Titanium Nitride Coated High Speed Steel Step Drills:

If you burn through these or break them, it is likely your own fault. I have had mine for several years and they are still sharp and hog right through anything I throw at them.

You will have problems with any drill bits if you aren't using the right speed for the material, if you do not use cutting fluid, and if you are not holding the workpiece correctly.

These have outlasted and outperformed a set I bought elsewhere and cost me a fraction of what I paid previously.

Comments about Warrior 3 Piece Titanium Nitride Coated High Speed Steel Step Drills:

I bought the bit set months ago and used them for the first time today---did a fantastic job. They really cut good and are easy to use in my drill press. I drilled holes up to 3/4" with no problems---I just kept pumping oil on the bit and metal where they met to keep it cool and keep down friction. If you see smoke, BACK OFF and put more oil before continuing your cut. They should last for a long time with PROPER use.

Comments about Warrior 3 Piece Titanium Nitride Coated High Speed Steel Step Drills:

This is an outstanding product, I have used it for years in the garage door industry. You need to drill a quick hole or enlarge one, this is the tool for you the quick change feature makes it quick and easy to use in a drill driver or an impact driver. This product works just as well as the big money ones at a far less expense and when it's dead toss it and get some more. They last a long time and can be resharpened just like the expensive ones. Use em they work.

Comments about Warrior 3 Piece Titanium Nitride Coated High Speed Steel Step Drills:

I have a set of these that I've used off and on for 5-6 years. They cut right through sheet metal just great. I did manage to dull the tip of one drilling a dozen or so holes in some REALLY tough stainless, but it's still good enough for it to start cutting into steel. Amazing performance, especially at this price.

Comments about Warrior 3 Piece Titanium Nitride Coated High Speed Steel Step Drills:

I use thies every day on my job as a locksmith. They are low cost and can do the lob of heaver drill sets.

Comments about Warrior 3 Piece Titanium Nitride Coated High Speed Steel Step Drills:

These step bits have outlasted other more expensive brands that used on hard projects.

Comments about Warrior 3 Piece Titanium Nitride Coated High Speed Steel Step Drills:

My first set lasted me 3 years, second set is still going! Destroyed the bigger one in the set on some 5/16th stainless. But hell stainless is hell on any bit! I dissagree about thick metals. I regularly drill 3/8th cold rolled flat bar to 3/4" bolt holes...

Comments about Warrior 3 Piece Titanium Nitride Coated High Speed Steel Step Drills:

Needed to drill 3/4" holes in 1/4" thick steel, these were just the ticket! Set my HF benchtop drill press to 620rpm and proceeded to cut through the steel like butter! Great value for the price!

Comments about Warrior 3 Piece Titanium Nitride Coated High Speed Steel Step Drills:

I am very pleased with these bits dont let your friends know you have them they my find a new home. I have had the same set for years drills any thing I put them to. Get them on sale for your best value. I use them for hot rod projects and almost every thing else.

Comments about Warrior 3 Piece Titanium Nitride Coated High Speed Steel Step Drills:

work very well. have drilled in wood, steel (door), steel tube (heavy) and had no problems at all. Went right through a steel door to put in viewer. Clean hole in and out. Made work a snap.