- LED Trailer Light Kit
- Product Overview
DescriptionLasting 30-40 times longer and requiring less power compared to standard incandescent bulbs, LED trailer lights are the cost-effective and time saving alternative for trailer lights. The LED trailer light kit comes with two combination class A stop, tail and turn signals, two amber side marker lights, license plate lights and split Y-style harness.
- Large 4-9/16 in. x4-9/16 in. lenses
- 28 individual LED lamps - 12 lamps for each side plus 4 license plate lamps on the left light
- Two 3W 12V T3 lamps for amber markers
- Corrosion-resistant housing
- 22 ft. split Y-style harness
- 4 ft. color-coded trunk harness
- License plate light and bracket
- For use on trailers up to 80 in. wide
This product complies with applicable DOT standardsSpecifications
Name LED Trailer Light Kit SKU 62488 Brand Haul-Master® Bulb quantity 28 Certification This product complies with applicable DOT standards Material TPR Product Height 2-5/8 in. Product Length 5 in. Product Weight 0.54 lbs. Product Width 4-1/2 in. Shipping Weight 2.45 lb. Accessories Included two combination class A stop, tail and turn signals, two amber side marker lights, license plate lights and 22 ft. split Y-style harness, 4 ft. color-coded trunk harness
- Customer Reviews
REVIEW SNAPSHOT®by PowerReviews
(based on 118 reviews)
of respondents would recommend this to a friend.
- Easy to install (4)
- Utility trailer (3)
- Reviewer Profile:
- Avid do-it-yourselfer (70), Professional (27), Casual do-it-yourselfer (12)
Most Liked Positive Review
Finally - with side marker lights
The side marker lights in this latest version of HF LED trailer lights are incandescent, but at least this set has something to illuminate the fixture from the side. Tail function is brighter than...Read complete review
The side marker lights in this latest version of HF LED trailer lights are incandescent, but at least this set has something to illuminate the fixture from the side. Tail function is brighter than my old incandescent fixtures. Brake function is plenty bright. (no question the LED brake is actually brighter than my car's brake lights!)
Want to make your wiring connections last longer? Grab a heat gun or hair dryer and heat up the hot glue around the 3 wires on each fixture and pull them back into the fixture. Next, grab a drill bit, ream out the excess glue. Now, stab your trailer wiring into the fixture and make your connections inside the plastic housing using HF #66595 Heat Shrink Butt Connectors. Once you've made and checked the connections, carefully heat up the hot glue and melt it back around trailer wiring to keep the water out of the housings.
Great value over other LED trailer lights.
Most Liked Negative Review
Not for boat trailers
Nothing on the package, on-line description, or instructions tell you, but a sticker on the light itself says, "Not submersible, do not use on boat trailers". You can't tell...Read complete review
Nothing on the package, on-line description, or instructions tell you, but a sticker on the light itself says, "Not submersible, do not use on boat trailers". You can't tell this till you get it home and open the package. A little irritated at that, will have to drive 30 miles each way to return.
Reviewed by 118 customers10/15/2016
totaly awsome will buy again
put these on my cargo carrier works great10/8/2016
Exactly What I Was Looking For
I installed the trailer lights in 30 minutes, very good directions. Remember to connect the white wire to a good ground. Lights are bright and functional.10/8/2016
I will buy this item again
Great package item - everything you need to do the job at a good price.10/4/2016
(1 of 1 customers found this review helpful)
Good price for extra brightness
Replaced incandescant lamps on tandem axle trailer with this kit - much brighter and eye-catching than previous lamps.
Good value and fit perfectly.9/22/2016
Best price I found beats the others!!!
complete kit, wiring and amber lights others where just tail only and a lot more money!!!!9/7/2016
LED Trailer Light Kit8/16/2016
Love the LED lights very bright and well built. Like many others who reviewed this item, I too noticed they are not recommended for boat trailers. However, with just a little extra effort (maybe 10 minutes) I think mine a now water tight. I removed all colored lenses and applied a coat of vasaline to the gaskets and reinstalled. I also ran a small bead of silicone on the seam for the lincense plate lense to seal it. Time will tell but I think I will have no trouble with them.8/10/2016
Very Good Value!
Have rewired several boat trailers with this product and have been well satisfied. Nice quality product for the money....8/1/2016
Highly acceptable so far
The original lights on my 4x6 fell apart. I installed these a couple of weeks ago and have used them for twelve hours so far including two five hour drives. They work well and are probably about as bright as the incandescents they replaced. The casing looks about the same as the old ones, therefore, I do not have hope for longevity. I do not abuse the lights and they never hit anything that I know about. They just cracked and fell apart after six years of use and weathering.
The wires look thick, but it is mostly insulation as the metal inside is very thin. The thin conductor is fine as these do use much less power. I do not know whether it is copper clad aluminum or copper, but it is definitely not tinned copper, therefore, ensure that all connections are well sealed. I did not like the twist and vampire wire connectors that come with the kit because of corrosion. If you use them, I recommend filling with liquid vinyl insulation or something. I soldered, covered with liquid vinyl, and finally covered with heat shrink. You can get water tight heat shrink with some sort of inner goo but I could not find mine.
I bought side markers at a trailer shop because my trailer is built for mounting sides with a single center bolt and I did not want to adapt the ones from this set.
These use much less power which causes my four wire light adapter to malfunction more. YMMV with the adapters to begin with and they have wacky behaviour in both of my cars so I plan on adding separate turn signal lights and wiring directly.
Manufacturer Warranty Detail We guarantee this product to be free from defects in materials and workmanship 90 days from the date of purchase. Limitations apply.
- User Manual
Get Shipping on Your Order!
Harbor Freight makes every effort to process orders within 24 hours of being placed. Orders placed before 2pm (PT) are generally SHIPPED the next business day.
|Please Note: Harbor Freight Tools cannot ship to PO Box addresses if shipping within the 48 contiguous states.|
|Guidelines for shipping to PO Box addresses:
• Maximum weight for packages shipped within the 48 contiguous states is 8 lbs.
• Maximum weight for packages shipped to AK, HI or GU is 70 lbs.
*Overweight items are shipped via freight delivery, please allow up to 20 business days for shipping. Standard Ground Shipping rates apply to deliveries within the continental Unites States.
|Lift-Gate Charge. If you do not have the equipment to offload certain overweight items from the delivery truck, a truck with a lift gate must be assigned for delivery of your order. The lift-gate charge covers the cost of this special delivery. If you think you will need a truck with a lift-gate, please contact Customer Service Inbound Sales at 1-800-423-2567.|