Low Profile/High Lift Floor Jack with Rapid Pump®, 2 Ton Heavy Duty

Comments about Pittsburgh Automotive Low Profile/High Lift Floor Jack with Rapid Pump®, 2 Ton Heavy Duty:

This is the only jack which will allow you to do the tricks such as lifting low-seating car (as my Nissan 300ZX) not only in one step to full height, but also lifting BOTH sides of a car using jack from ONE side.

To clarify: sometimes I have to work in narrow garage, and if I leave extra space between car and wall on drivers side, there is no way to fit a jack and me on the passenger side. This jack is long enough, powerful enough, and stable enough to lift drivers side and put it on a jack-stand, and then lift passenger side, working from drivers side only.

Another advantages are really low profile, and high lift, you wouldn't need intermediate steps when high lifting. Undeniably, the best jack I've ever used.

Remember, this thing is big and heavy, picture does not show how big it is.

Comments about Pittsburgh Automotive Low Profile/High Lift Floor Jack with Rapid Pump®, 2 Ton Heavy Duty:

I use this to get my BMW 3 series safely up onto 4 jack stands. I like that it is easy to get the jack under the front lift point about 5 inches off the ground, and way under there. I also like the padding on the handle, the crossbar at the end of the handle and the easy-to-release knob.

Comments about Pittsburgh Automotive Low Profile/High Lift Floor Jack with Rapid Pump®, 2 Ton Heavy Duty:

Bought to replace an aluminum "Speed" jack I broke through dynamic overload. This was a good replacement choice. Very heavy duty. Has a tremendous amount of lifting height and is stable at full lift. Used to lift a Corvette. Easy side lift, but still needs the front end up on 2X8 to get under engine cross member. Don't think there is a floor jack made with only 3" clearance capability that will reach the cross-member of a Corvette.

I would buy this again and recommend it to a friend.

Comments about Pittsburgh Automotive Low Profile/High Lift Floor Jack with Rapid Pump®, 2 Ton Heavy Duty:

Some people might say it leaks down. When you first use it, just bleed it and you're set! It fits under my lowered Miata just fine, and it's tough. Just buy one already..and use jackstands!

Comments about Pittsburgh Automotive Low Profile/High Lift Floor Jack with Rapid Pump®, 2 Ton Heavy Duty:

I have some slammed vehicles (coilovers set for track) and some SUVs in my driveway and this jack is great for both, really low profile but great lift capacity too.

It's also super-steady, even though it's only a 2 ton, so it inspires my confidence. I have been using it in my garage for about three months, for things like swapping wheel sets, rotating tires, oil changes, differential and tranny fluid changes, brake bleeds, and pad swaps.

The hydraulics are good. I jacked up a 3,600 lb car and positioned a jack stand under the suspension cross-member, but left it hovering a 1/2 inch off the jack stand, held up by the jack. A week later, the car still hadn't settled onto the jack stand.

But I never get under a car unless it's settled on the jack stands, and you shouldn't either! Also make sure you buy good wheel chocks, of course.

Comments about Pittsburgh Automotive Low Profile/High Lift Floor Jack with Rapid Pump®, 2 Ton Heavy Duty:

This jack is very nice for the price. I had it delivered to my place of work as they have a loading dock - it weights about 100 lbs so I'm not sure how that would work for home delivery. Anyway, the box was rather beat up but nothing was missing and no damage to the jack. For a 2 ton unit it is heavy duty. Low (really low) profile. If you can't get this under your car you have issues. The handle is one pc so no flexing like some of the bolt together units out there. Can't say how durable, only used twice but am very happy with it.

Comments about Pittsburgh Automotive Low Profile/High Lift Floor Jack with Rapid Pump®, 2 Ton Heavy Duty:

I needed this jack to get under my 1999 C5 Corvette. It fit under the ground effects at the lift points and easily lifted the car. None of my other jacks would fit under the car without driving it up on a couple of 2X8 boards first. If it holds up like my other Harbor Freight jacks I'll be using it for a long time to come. So far I am extremely satisfied with it.

Comments about Pittsburgh Automotive Low Profile/High Lift Floor Jack with Rapid Pump®, 2 Ton Heavy Duty:

I am a beginner and needed this jack to oil changes and small jobs. I wanted a rate rated way over what I needed to lift a Mustang and a Tarus, this jack is perfect. This thing is a tank, steady, lifts very high, good foundation sits right where you put it! Now this jack is NOT portable at all, pretty big and weighs 100lbs which I like, nice solid frame, and talk about easy lifting about 7 pumps and my cars are ready.I can see me useing this jack for many years to come. Don't risk your life with a $49 [@] jack.....and don't forget jack stands people don't be stupid, be safe, I spent $150 on the jack and stands and years of use aheaad of me.

Comments about Pittsburgh Automotive Low Profile/High Lift Floor Jack with Rapid Pump®, 2 Ton Heavy Duty:

With this ONE FLOOR JACK, I don't need 3 others that I have in the Shop. This one works GREAT for the Lowered as well as the Lifted Vehicles that come into the Shop.

Comments about Pittsburgh Automotive Low Profile/High Lift Floor Jack with Rapid Pump®, 2 Ton Heavy Duty:

This jack fits under my slamed 53 and a lowered C5 Corvette with ease. Works great.
If you have a lowered car / truck it is a must have. Don't let the low profile worry you, this thing has pleanty of hight and lifts and lowers easy too..