| Accessories Included |
Chrome plated collets: two 1/8", one 3/32", one 1/16"; Aluminum oxide grinding wheels: two 5.8" x 3/8" 120 grit, two 3/8" x 1/2" 120 grit, two 3/8" x 3/4" parabolic 120 grit, six 3/4" x 1/8" 120 grit; Silicon carbide grinding wheels: two 25/32" x 3/16" 120 grit, two 13/32" x 1/8" 120 grit, six 3/4" x 1/8" 180 grit; eight 3/4" x 1/8" green stone grinding wheels; six 3/4" x 1/8" pink stone grinding wheels; 30 3/4" sand paper round pads; Sanding bands: four 1/4" x 1/2" 80 grit, eight 1/2" x 1/2" 80 grit; Flap wheel: one 1-1/4" x 3/8" 80 grit; Sanding shanks: one 1/2" x 1/2", one 1/4" x 1/2"; Diamond points: one 1/8" x 5/16" cylindrical, one 3/32" x 3/8" cylindrical, one 3/8" tree, one 11/64" sphere, one 5/64" sphere; Carbide point: one 1/8" sphere; High speed steel point: one 1/8" x 3/8"; Cutoff wheels: five 1-1/4" x 3/64" fiberglass reinforced, thirty 15/16" x 1/32" heavy duty, thirty 15/16" x 1/64" regular duty, two 1/16" cutoff wheel mandrels; Rubber emery wheel: one 7/8" x 5/32"; Bristle brushes: one 3/4" x 1-3/4" radial, two 3/8" x 1-3/4" axial; Wire brushes: one 1/2" x 1-3/4" stainless steel axial, two 1/2" x 1-3/4" stainless steel radial, one 1/2" x 1-3/4" brass axial; Buffing wheels: three 1/2" x 1/4" felt, one 3/8" x 3/4" pointed felt, four 1" x 1/4" felt, one 3/32" mandrel for felt wheels, one 1" x 1/8" sixteen layer cloth, one 3/32" mandrel for cloth wheel; eight 1/2" x 1/4" felt wheel pads; 3/8" x 3/4" felt polishing pointed tip; High speed steel twist drills: two 1/8", one 3/32", one 1/16"; Dressing stone for silicon carbide wheels; 1" x 3/8" gray rectangle dressing stone; Collet wrench; Case |