-
jack stands Review by big mike
-
i prchased these for my 6x10 enclosed motorcycle trailer...they have been out side for 3 monthes on some 1 foot square peices of wood..i drive my 1000 lb harley on them every day.
(Posted on 7/24/10)
-
Good product for price Review by me
-
My only complaint is that they Y at the top is too deep to correctly receive the jack posts on my Honda CR-V. They ends of they Y hit the under carriage before they post hits they valley of Y. From the pictures, the 12 ton jacks wouldn't have this problem.
(Posted on 7/20/10)
-
Rubber Pads Review by Wade
-
2 Piece Rubber Pads for 3T & 6T Jack Stands are available. (Item # 95952)
(Posted on 7/16/10)
-
They do what they were designed for. Review by Bob Looby
-
If more ground clearance is needed I put a 2"X10" (or several depending on the task) under the stands, the important thing is to be on a solid and level surface.
(Posted on 7/16/10)
-
Good stuff Review by Dee Jay
-
I own these along with big red torin pair. The three tons are really reliable and sturdy. Good product for the price.
(Posted on 7/15/10)
-
awesome Review by dudeman
-
Great product at a great price. I use these a lot without any issues. I use them for my truck which is over 2 1/4 and haven't noticed any structural problems. The paint has faded from being outside but that's just cosmetic.
(Posted on 7/14/10)
-
All i care is the function(which they work), not the looks so much Review by ron
-
s
(Posted on 7/13/10)
-
All i care is the function(which they work), not the looks so much Review by Ron
-
Well I bought these for 17 bucks, i could have had them for sale but ill have two more on sale, my coupons wernt active for the stands until next month :( but, still not bad for the price, but i am going to take my wire wheel and clean off all the EXCESS paint on the part that has the mutiple latching spots, cause when they painted it, there were spots on the teeth i guess i can say, had too much paint that idk if it would have enough contact to hold the car, but once i cleaned the excess paint off it works really well. And im going to say, im just really obvious and picky about things, but the welds don't look like someone was too happy about welding, or if a machine did it and had crap wire or rods. But the welds are good as in strength but looks sloppy, if i notice anything happening ill just touch it up with my mig welder. but its 17 bucks, and like everyone else says "get what you pay for".
(Posted on 7/13/10)
-
Work great! Review by Andrew
-
These work great for the low price. They did not come with the red things in the picture though. Also, the inside of them wasn't painted well so they came rusty in part of the inside. Not a big deal, but that's a reason why to get the aluminum ones.
(Posted on 6/17/10)
-
Works Well Review by Michael
-
Before I discovered HFT I bought a pair of similar stands for more than double the price I paid for these (I got them on sale though). They seem to hold up fine. They weren't tall enough to hold up my van as high as I wanted it held up, but thats my own fault for buying the smaller cheaper ones. If I fork over the extra money for the bigger ones that wouldn't be a problem. Bottom line, they hold my vehicles up just fine.
PS. if they're on sale, it wouldn't hurt to get an extra set. use two stands instead of one in a spot so that if one were to fail, the other would catch (hopefully).
(Posted on 6/13/10)
-
jack stands Review by alex
-
great for the money i have two sets great for the guy working out of his garage at his house well built for the money i shopped around for other one and could not beat the price of $20 a pair love them use them all the time
(Posted on 6/2/10)
-
These work great Review by Troy
-
I have owned these for more than 10 years, and I have no complaints. They work exactly as advertised and seem to be indestructable.
(Posted on 6/2/10)
-
Great product for the price Review by John
-
I have 12 of these stands that I use to get my cars off of the floor for winter storage. The work great for the price when on sale. I wouldn't pay full price for these since they seem to go on sale quite often. I bought my stands when they were on sale for $11.99. You can't even find them used at this price. They only extend to a max of 16", but this is more than adequate for my needs.
(Posted on 5/13/10)
-
Good value Review by Dj
-
Sturdy, well constructed. Be sure to tap the retaining tab into place once you've assembled them.
(Posted on 5/11/10)
